Skip to content
Free tool

CMMC Level 2 Readiness Check

Check the 65 technical controls a script can see on a Windows machine, then mark each of the 110 NIST SP 800-171 requirements as met or not and see your SPRS score, your biggest gaps and whether Conditional Level 2 is within reach. Free; nothing leaves your machine or your browser.

Step 1 · Check the technical controls

Run the endpoint script: two commands, about a minute

One read-only PowerShell script checks 65 settings on a Windows machine or AVD session host and names the requirement each one supports (38 of the 110). Use Run as administrator for the complete answer: without it, 4 checks report Unknown instead of guessing.

  1. 1. Download the script

    Invoke-WebRequest https://www.atlasavd.com/tools/atlas-endpoint-assessment.ps1 -OutFile atlas-endpoint-assessment.ps1
  2. 2. Run every check

    powershell.exe -NoProfile -ExecutionPolicy Bypass -File .\atlas-endpoint-assessment.ps1

You get a color-coded summary in the console and three reports in the current folder: an HTML page to share, a CSV to drop into a POA&M, and JSON with the full software inventory. Add -ListControls to see the catalogue without checking anything, -Practice AC.L2-3.1.1 to run only the checks behind one requirement, or -OutputDirectory to choose where the reports go. Version 1.1.0.

Read-only

Every check reads the registry, WMI or a built-in Windows tool. Nothing is installed, enabled or changed.

Nothing leaves the machine

The script makes no network calls. Results go to the console and to HTML, JSON and CSV files in a folder you choose.

Unknown is never a pass

If a setting can't be read (usually because the prompt isn't elevated), the control is reported as Unknown, not guessed.

Plain text, MIT licensed

One readable .ps1 file. Read it before you run it, change it, or fold it into your own tooling.

All 65 checks the script runs

Access Control (12)

  • AC-01Local Administrators group has no broad groupsAC.L2-3.1.5
  • AC-02Built-in Administrator account is disabledAC.L2-3.1.5
  • AC-03Guest account is disabledAC.L2-3.1.1
  • AC-04User Account Control is on and prompts administratorsAC.L2-3.1.7
  • AC-05Screen locks after 15 minutes or less of inactivityAC.L2-3.1.10
  • AC-06Logon banner (system use notification) is shownAC.L2-3.1.9
  • AC-07Remote Desktop requires Network Level AuthenticationAC.L2-3.1.13
  • AC-08Idle and disconnected remote sessions are endedAC.L2-3.1.11
  • AC-09Unsolicited Remote Assistance is offAC.L2-3.1.12
  • AC-10Anonymous enumeration of accounts and shares is blockedAC.L2-3.1.1
  • AC-11Remote Desktop drive and clipboard redirection is restrictedAC.L2-3.1.3
  • AC-12Account lockout after 10 or fewer failed logonsAC.L2-3.1.8

Identification and Authentication (10)

  • IA-01Minimum password length is 14 or moreIA.L2-3.5.7
  • IA-02Password complexity is requiredNeeds adminIA.L2-3.5.7
  • IA-03Password history remembers 24 or more passwordsIA.L2-3.5.8
  • IA-04LAN Manager hashes are not storedIA.L2-3.5.10
  • IA-05Only NTLMv2 is sent; LM and NTLM are refusedIA.L2-3.5.10
  • IA-06WDigest does not keep plaintext credentials in memoryIA.L2-3.5.10
  • IA-07LSA runs as a protected processIA.L2-3.5.10
  • IA-08Credential Guard is runningIA.L2-3.5.10
  • IA-09Device is joined to a directory (Entra ID or Active Directory)IA.L2-3.5.2
  • IA-10Cached domain logons are limited to 4 or fewerIA.L2-3.5.10

Audit and Accountability (6)

  • AU-01Advanced audit policy covers logon, account and policy eventsNeeds adminAU.L2-3.3.1
  • AU-02Advanced audit policy overrides legacy category settingsAU.L2-3.3.1
  • AU-03Process creation events include the command lineAU.L2-3.3.2
  • AU-04PowerShell script block logging is onAU.L2-3.3.1
  • AU-05Security event log holds at least 192 MBAU.L2-3.3.1
  • AU-06Clock synchronizes with an authoritative time sourceAU.L2-3.3.7

Configuration Management (10)

  • CM-01Windows version is still supported by MicrosoftCM.L2-3.4.1
  • CM-02SMBv1 is disabledCM.L2-3.4.6
  • CM-03PowerShell 2.0 engine is removedCM.L2-3.4.6
  • CM-04Nonessential remote services are disabledCM.L2-3.4.7
  • CM-05LLMNR and NetBIOS name resolution are disabledCM.L2-3.4.7
  • CM-06Application control (App Control for Business or AppLocker) is enforcedCM.L2-3.4.8
  • CM-07Windows Installer never runs with elevated privilegesCM.L2-3.4.9
  • CM-08AutoRun and AutoPlay are disabled on all drivesCM.L2-3.4.6
  • CM-09Secure Boot is enabledCM.L2-3.4.2
  • CM-10Installed software inventoryCM.L2-3.4.1

Media Protection (1)

  • MP-01Removable storage access is restricted by policyMP.L2-3.8.7

System and Communications Protection (12)

  • SC-01Windows Firewall is on for every profileSC.L2-3.13.1
  • SC-02Firewall blocks inbound connections by defaultSC.L2-3.13.6
  • SC-03System drive is encrypted with BitLockerSC.L2-3.13.16
  • SC-04BitLocker uses XTS-AES encryptionNeeds adminSC.L2-3.13.11
  • SC-05FIPS-compliant algorithm policy is onSC.L2-3.13.11
  • SC-06SSL 3.0, TLS 1.0 and TLS 1.1 are disabledSC.L2-3.13.8
  • SC-07SMB signing is required (client and server)SC.L2-3.13.8
  • SC-08Remote Desktop uses TLS and high encryptionSC.L2-3.13.8
  • SC-09Office blocks macros in files from the internetSC.L2-3.13.13
  • SC-10TPM is present and readyNeeds adminSC.L2-3.13.10
  • SC-11Memory integrity (HVCI) is runningSC.L2-3.13.2
  • SC-12IP source routing is disabledSC.L2-3.13.1

System and Information Integrity (11)

  • SI-01Antivirus real-time protection is onSI.L2-3.14.2
  • SI-02Antivirus signatures are less than 3 days oldSI.L2-3.14.4
  • SI-03A malware scan ran in the last 7 daysSI.L2-3.14.5
  • SI-04Defender tamper protection is onSI.L2-3.14.2
  • SI-05Cloud-delivered protection and PUA blocking are onSI.L2-3.14.2
  • SI-06Attack surface reduction rules are configuredSI.L2-3.14.2
  • SI-07Network protection is onSI.L2-3.14.6
  • SI-08Endpoint detection and response sensor is runningSI.L2-3.14.7
  • SI-09An update was installed in the last 35 daysSI.L2-3.14.1
  • SI-10No reboot is pending to finish updatesSI.L2-3.14.1
  • SI-11Microsoft Defender SmartScreen is onSI.L2-3.14.2

Azure Virtual Desktop (3)

  • AVD-01Screen capture protection is onAC.L2-3.1.3
  • AVD-02Watermarking is onAC.L2-3.1.3
  • AVD-03Profile containers (FSLogix) are configuredAC.L2-3.1.3
Step 2 · Score all 110 requirements

Estimate your SPRS score

Mark each requirement as met or not. Use the script's report for the technical ones, and what you know about your policies, training and facilities for the rest. Your answers stay in this browser.

Points show what each requirement is worth under the DoD Assessment Methodology. No POA&M marks requirements that must be met outright for Conditional Level 2. means the endpoint script checks settings behind it; choose Endpoint script on its row to run only those checks.

ACAccess Control0/22-54
  • Limit system access to authorized users, processes acting on their behalf, and devices

    AC.L2-3.1.15 pts

  • Limit system access to the transactions and functions authorized users are permitted to execute

    AC.L2-3.1.25 pts

  • Control the flow of CUI in accordance with approved authorizations

    AC.L2-3.1.31 pt

  • Separate the duties of individuals to reduce the risk of malevolent activity without collusion

    AC.L2-3.1.41 pt

  • Employ the principle of least privilege, including for security functions and privileged accounts

    AC.L2-3.1.53 pts

  • Use non-privileged accounts or roles when accessing nonsecurity functions

    AC.L2-3.1.61 pt

  • Prevent non-privileged users from executing privileged functions and audit privileged functions

    AC.L2-3.1.71 pt

  • Limit unsuccessful logon attempts

    AC.L2-3.1.81 pt

  • Provide privacy and security notices consistent with applicable CUI rules

    AC.L2-3.1.91 pt

  • Use session lock with pattern-hiding displays after a period of inactivity

    AC.L2-3.1.101 pt

  • Terminate (automatically) a user session after a defined condition

    AC.L2-3.1.111 pt

  • Monitor and control remote access sessions

    AC.L2-3.1.125 pts

  • Employ cryptographic mechanisms to protect the confidentiality of remote access sessions

    AC.L2-3.1.135 pts

  • Route remote access via managed access control points

    AC.L2-3.1.141 pt

  • Authorize remote execution of privileged commands and remote access to security-relevant information

    AC.L2-3.1.151 pt

  • Authorize wireless access prior to allowing such connections

    AC.L2-3.1.165 pts

  • Protect wireless access using authentication and encryption

    AC.L2-3.1.175 pts

  • Control connection of mobile devices

    AC.L2-3.1.185 pts

  • Encrypt CUI on mobile devices and mobile computing platforms

    AC.L2-3.1.193 pts

  • Verify and control or limit connections to and use of external systems

    AC.L2-3.1.201 ptNo POA&M

  • Limit use of portable storage devices on external systems

    AC.L2-3.1.211 pt

  • Control CUI posted or processed on publicly accessible systems

    AC.L2-3.1.221 ptNo POA&M

ATAwareness and Training0/3-11
  • Make managers, administrators and users aware of the security risks of their activities and the applicable policies

    AT.L2-3.2.15 pts

  • Ensure personnel are trained to carry out their assigned information security duties

    AT.L2-3.2.25 pts

  • Provide security awareness training on recognizing and reporting insider threat indicators

    AT.L2-3.2.31 pt

AUAudit and Accountability0/9-19
  • Create and retain system audit logs to enable monitoring, analysis, investigation and reporting

    AU.L2-3.3.15 pts

  • Ensure the actions of individual users can be uniquely traced to those users

    AU.L2-3.3.23 pts

  • Review and update logged events

    AU.L2-3.3.31 pt

  • Alert in the event of an audit logging process failure

    AU.L2-3.3.41 pt

  • Correlate audit record review, analysis and reporting processes for investigation and response

    AU.L2-3.3.55 pts

  • Provide audit record reduction and report generation to support on-demand analysis and reporting

    AU.L2-3.3.61 pt

  • Provide a system capability that synchronizes internal clocks with an authoritative time source

    AU.L2-3.3.71 pt

  • Protect audit information and logging tools from unauthorized access, modification and deletion

    AU.L2-3.3.81 pt

  • Limit management of audit logging functionality to a subset of privileged users

    AU.L2-3.3.91 pt

CMConfiguration Management0/9-33
  • Establish and maintain baseline configurations and inventories of systems

    CM.L2-3.4.15 pts

  • Establish and enforce security configuration settings for IT products

    CM.L2-3.4.25 pts

  • Track, review, approve or disapprove, and log changes to systems

    CM.L2-3.4.31 pt

  • Analyze the security impact of changes prior to implementation

    CM.L2-3.4.41 pt

  • Define, document, approve and enforce access restrictions associated with changes

    CM.L2-3.4.55 pts

  • Employ the principle of least functionality: provide only essential capabilities

    CM.L2-3.4.65 pts

  • Restrict, disable or prevent nonessential programs, functions, ports, protocols and services

    CM.L2-3.4.75 pts

  • Apply deny-by-exception (blacklisting) or permit-by-exception (whitelisting) to software

    CM.L2-3.4.85 pts

  • Control and monitor user-installed software

    CM.L2-3.4.91 pt

IAIdentification and Authentication0/11-27
  • Identify system users, processes acting on their behalf, and devices

    IA.L2-3.5.15 pts

  • Authenticate the identities of users, processes or devices before allowing access

    IA.L2-3.5.25 pts

  • Use multifactor authentication for local and network access to privileged accounts and network access to non-privileged accounts

    IA.L2-3.5.35 pts(3 if partly met)

  • Employ replay-resistant authentication mechanisms for network access to accounts

    IA.L2-3.5.41 pt

  • Prevent reuse of identifiers for a defined period

    IA.L2-3.5.51 pt

  • Disable identifiers after a defined period of inactivity

    IA.L2-3.5.61 pt

  • Enforce minimum password complexity and change of characters when new passwords are created

    IA.L2-3.5.71 pt

  • Prohibit password reuse for a specified number of generations

    IA.L2-3.5.81 pt

  • Allow temporary passwords for logons only with an immediate change to a permanent password

    IA.L2-3.5.91 pt

  • Store and transmit only cryptographically-protected passwords

    IA.L2-3.5.105 pts

  • Obscure feedback of authentication information

    IA.L2-3.5.111 pt

IRIncident Response0/3-11
  • Establish an operational incident-handling capability: preparation, detection, analysis, containment, recovery and response

    IR.L2-3.6.15 pts

  • Track, document and report incidents to designated officials and authorities

    IR.L2-3.6.25 pts

  • Test the organizational incident response capability

    IR.L2-3.6.31 pt

MAMaintenance0/6-18
  • Perform maintenance on organizational systems

    MA.L2-3.7.13 pts

  • Provide controls on the tools, techniques, mechanisms and personnel used for system maintenance

    MA.L2-3.7.25 pts

  • Ensure equipment removed for off-site maintenance is sanitized of any CUI

    MA.L2-3.7.31 pt

  • Check media containing diagnostic and test programs for malicious code before use

    MA.L2-3.7.43 pts

  • Require multifactor authentication for nonlocal maintenance sessions and terminate them when complete

    MA.L2-3.7.55 pts

  • Supervise the maintenance activities of personnel without required access authorization

    MA.L2-3.7.61 pt

MPMedia Protection0/9-23
  • Protect (physically control and securely store) system media containing CUI, paper and digital

    MP.L2-3.8.13 pts

  • Limit access to CUI on system media to authorized users

    MP.L2-3.8.23 pts

  • Sanitize or destroy system media containing CUI before disposal or release for reuse

    MP.L2-3.8.35 pts

  • Mark media with necessary CUI markings and distribution limitations

    MP.L2-3.8.41 pt

  • Control access to media containing CUI and maintain accountability during transport

    MP.L2-3.8.51 pt

  • Implement cryptographic mechanisms to protect CUI on digital media during transport

    MP.L2-3.8.61 pt

  • Control the use of removable media on system components

    MP.L2-3.8.75 pts

  • Prohibit the use of portable storage devices when such devices have no identifiable owner

    MP.L2-3.8.83 pts

  • Protect the confidentiality of backup CUI at storage locations

    MP.L2-3.8.91 pt

PSPersonnel Security0/2-8
  • Screen individuals prior to authorizing access to systems containing CUI

    PS.L2-3.9.13 pts

  • Ensure CUI and systems are protected during and after personnel actions such as terminations and transfers

    PS.L2-3.9.25 pts

PEPhysical Protection0/6-14
  • Limit physical access to systems, equipment and operating environments to authorized individuals

    PE.L2-3.10.15 pts

  • Protect and monitor the physical facility and support infrastructure

    PE.L2-3.10.25 pts

  • Escort visitors and monitor visitor activity

    PE.L2-3.10.31 ptNo POA&M

  • Maintain audit logs of physical access

    PE.L2-3.10.41 ptNo POA&M

  • Control and manage physical access devices

    PE.L2-3.10.51 ptNo POA&M

  • Enforce safeguarding measures for CUI at alternate work sites

    PE.L2-3.10.61 pt

RARisk Assessment0/3-9
  • Periodically assess the risk to operations, assets and individuals from processing, storing or transmitting CUI

    RA.L2-3.11.13 pts

  • Scan for vulnerabilities in systems and applications periodically and when new vulnerabilities are identified

    RA.L2-3.11.25 pts

  • Remediate vulnerabilities in accordance with risk assessments

    RA.L2-3.11.31 pt

CASecurity Assessment0/4-13
  • Periodically assess the security controls to determine if they are effective

    CA.L2-3.12.15 pts

  • Develop and implement plans of action to correct deficiencies and reduce or eliminate vulnerabilities

    CA.L2-3.12.23 pts

  • Monitor security controls on an ongoing basis to ensure their continued effectiveness

    CA.L2-3.12.35 pts

  • Develop, document and periodically update a System Security Plan

    CA.L2-3.12.4Required for a scoreNo POA&M

SCSystem and Communications Protection0/16-42
  • Monitor, control and protect communications at the external and key internal boundaries

    SC.L2-3.13.15 pts

  • Employ architectural designs, development techniques and engineering principles that promote security

    SC.L2-3.13.25 pts

  • Separate user functionality from system management functionality

    SC.L2-3.13.31 pt

  • Prevent unauthorized and unintended information transfer via shared system resources

    SC.L2-3.13.41 pt

  • Implement subnetworks for publicly accessible system components, separated from internal networks

    SC.L2-3.13.55 pts

  • Deny network communications traffic by default and allow by exception

    SC.L2-3.13.65 pts

  • Prevent remote devices from split tunneling while connected to organizational systems

    SC.L2-3.13.71 pt

  • Implement cryptographic mechanisms to prevent unauthorized disclosure of CUI during transmission

    SC.L2-3.13.83 pts

  • Terminate network connections at the end of sessions or after a defined period of inactivity

    SC.L2-3.13.91 pt

  • Establish and manage cryptographic keys for cryptography employed in systems

    SC.L2-3.13.101 pt

  • Employ FIPS-validated cryptography when used to protect the confidentiality of CUI

    SC.L2-3.13.115 pts(3 if partly met)

  • Prohibit remote activation of collaborative computing devices and indicate devices in use

    SC.L2-3.13.121 pt

  • Control and monitor the use of mobile code

    SC.L2-3.13.131 pt

  • Control and monitor the use of Voice over Internet Protocol (VoIP) technologies

    SC.L2-3.13.141 pt

  • Protect the authenticity of communications sessions

    SC.L2-3.13.155 pts

  • Protect the confidentiality of CUI at rest

    SC.L2-3.13.161 pt

SISystem and Information Integrity0/7-31
  • Identify, report and correct system flaws in a timely manner

    SI.L2-3.14.15 pts

  • Provide protection from malicious code at designated locations

    SI.L2-3.14.25 pts

  • Monitor system security alerts and advisories and take action in response

    SI.L2-3.14.35 pts

  • Update malicious code protection mechanisms when new releases are available

    SI.L2-3.14.45 pts

  • Perform periodic scans of systems and real-time scans of files from external sources

    SI.L2-3.14.53 pts

  • Monitor systems, including inbound and outbound traffic, to detect attacks and indicators of attack

    SI.L2-3.14.65 pts

  • Identify unauthorized use of organizational systems

    SI.L2-3.14.73 pts

Frequently asked questions

Is this an official SPRS score?

No. It applies the DoD Assessment Methodology's point values to your own answers, which is how a self-assessment score is calculated, but only you can post a score to SPRS, and a CMMC Level 2 certification needs an assessment by a C3PAO. Use this to plan, not to report.

How is the score calculated?

Start at 110 and subtract the value of each requirement that isn't fully implemented: 5, 3 or 1 point, 313 points in all, so the lowest score is -203. MFA (3.5.3) and FIPS-validated encryption (3.13.11) lose 3 points instead of 5 when partly in place. Requirements you haven't answered count as not met.

Why is there no score until I mark the System Security Plan as met?

Requirement 3.12.4 has no point value because the methodology can't produce a score at all without a System Security Plan. Every assessment starts by reading it.

What is Conditional Level 2?

Under the CMMC rule (32 CFR 170.21) you can be granted Conditional Level 2 status with a score of at least 88, as long as every requirement you haven't met is allowed on a Plan of Action and Milestones. Only 1-point requirements qualify (plus 3.13.11 when encryption is used but not FIPS-validated), never 3.1.20, 3.1.22, 3.10.3, 3.10.4, 3.10.5 or 3.12.4, and the POA&M must be closed within 180 days.

Where are my answers stored?

Only in this browser, so you can come back and carry on. Nothing is sent to Atlas AVD. Export the CSV to keep a copy or share it with your team; clearing your browser data or pressing Reset removes the answers.

How do the two steps fit together?

The endpoint script reads the technical settings on a Windows machine or AVD session host and names the requirement each one supports. Use its report to answer those requirements in the checklist, then answer the rest (policy, training, physical security and so on) from what you know. Requirements the script covers carry an Endpoint script command that runs only that requirement's checks.

Does passing every check make a machine CMMC compliant?

No. CMMC and NIST SP 800-171 practices also need written policy, procedures and evidence over time that no script can see. The script shows the technical settings on one machine, today. Use it to find gaps and to answer the technical requirements in the checklist, not as a certification.

Do I need to run it as administrator?

No, but you'll get a more complete answer if you do. Five checks (password complexity, the advanced audit policy, BitLocker cipher, TPM status and, on some systems, attack surface reduction rules) need an elevated prompt; without one they report Unknown.

Why won't Windows run the script?

Windows blocks unsigned downloaded scripts under the default execution policy. The run command uses -ExecutionPolicy Bypass for that one process only; it doesn't change your machine's policy. You can also run Unblock-File on the script first.

Which versions of Windows does it support?

Windows 10 and 11 (including Enterprise multi-session on Azure Virtual Desktop) and Windows Server 2016 to 2025, on Windows PowerShell 5.1 or PowerShell 7. The Azure Virtual Desktop checks run only on session hosts.

We use a third-party antivirus or EDR. Will it fail?

No. The antivirus check reads Windows Security Center, so any registered product counts, and the EDR check recognizes the major sensors. Defender-specific checks are reported as N/A when Defender isn't your active antivirus.

How does the script score a machine?

Passes count fully and warnings count half, divided by everything that passed, warned or failed. Unknown, informational and N/A results are left out, so running unelevated doesn't lower the score; it just answers fewer questions.

Can I run it across many machines?

Yes. Run it through your RMM, Intune remediation or a scheduled task with -OutputDirectory pointing at a share, then combine the CSV files. Atlas AVD checks these controls continuously across every session host and keeps the evidence for you.

Keep the evidence, not just the score

Atlas AVD checks the technical requirements on every session host continuously and keeps the evidence your assessor will ask for.

Free forever for 1 tenant & 1 host pool on the Community plan, or 30 days of every feature.